- Transfer Type Molding Machine
- Plate Vulcanizing Press
- Vacuum Vulcanizing Press
- Rubber Injection Molding Machine
- Transfer Type Molding Machine For Thermoset Plastic
- Rubber Mould
- Rubber Products
- Rubber machinery,
- hydraulic valve
- Plastic
Plate compression press
Product characteristics
1.Computer-optimized structure design, three-beam and four-column structure, which is easy,economic, and practical
2.Hydraulic system accelerated via prefilling, auxiliary cylinder ascending and descending with reliable and accurate motion as well as low hydraulic impact for a longer life
3.Button-type foot electrical control or manual control both applicable
4. Computer programming, fullly automatic cycling and delayed holding pressure realizable
5. 100mm/s for idle stroke and 12mm/s for pressurization
6.Customized table size, stroke and tonnage
7.Equipped with holding cylinder above and below
1.the compression press can vulcanize all kinds of rubber products
2.the type of this plate vulcanizing press is column
This vulcanizing machine is used for vulcanizing all kinds of rubber and plastic model products, and non-model products.
Being a column structure and downward pressing type, the heating plate opens by the self-weight of the heating plate, platform and plunger. The rising of the plunger makes the heating plate close while the hydraulic oil provides the pressure.
