Product Catalogue
- Transfer Type Molding Machine
- Plate Vulcanizing Press
- Vacuum Vulcanizing Press
- Rubber Injection Molding Machine
- Transfer Type Molding Machine For Thermoset Plastic
- Rubber Mould
- Rubber Products
- Rubber machinery,
- hydraulic valve
- Plastic
Hydraulic Balancing Valve
Hydronic balance of heating and cooling systems is necessary to avoid the following problems:
*Some rooms almost never achieve the desired room temperature or are not cooled sufficiently. This problem especially arises in case of influence of other heat sources
*After changing over from low temperature to heating operation, parts of the system are only heated after a long time
*Fluctuating room temperatures especially arising during low demand periods
High energy consumption although the required room temperature regulator is installed
Technical specification
|
Model
|
DYP-02-P
|
DYP-03 -P
|
DYP-02 -A
|
DYP-03-A
|
DYP-02 -B
|
DYP-03-B
|
| Maximum Pressure (MPa) |
31.5
|
|||||
| Press Control Range |
7=To 7; 14=To 14; 21=To 21; 31.5=To 31.5MPa
|
|||||
| Maximum Flow(1/mn) |
0235 0370
|
|||||
| Weight (Kg) |
021.4 034.2
|
|||||
Model description 
Function Symbol
Mounting dimensions
rubber machinery
